Cirris Easy-Touch Pro - Introduction and Setup; Hipot Warning

Introduction and Setup
1
1. Introduction and Setup
This getting started guide walks you through how to set up and operate the Cirris Easy-Touch™ Pro hardware and software.
An overview is included on how to learn, verify, and test a sample cable. You can also learn how to share Touch 1/1100 test
programs with Easy-Touch Pro test programs. To connect your tester(s) to a network, add a printer, or update your software,
see the I.T. Administration Addendum. Talk to your Cirris account manager to obtain this document.
The Easy-Touch Pro tester uses Cirris Easy-Wire software. The complete Easy-Wire manual can be viewed in the Easy-Wire
help system. For information on how to access the help system, see page 28.
1.1 Hipot Warning
Possible electric shock
Although Cirris hipot testers are designed to be safe for operators, certain situations may cause an occasional mild electric
shock. Small shocks only occur during the hipot portion of a test if an operator touches the energized connection point.
Any shock from the tester may result in a hipot test failure.
Medical Warning
Children or individuals wearing a cardiac pacemaker, insulin pump, or electronically controlled medical device should NOT
perform hipot testing.
For more ideas on improving hipot safety, visit the Cirris website at www.cirris.com/testing/guidelines/hipot_safety.html
1.2 Cirris Customer Support
For assistance with your Easy-Wire software, you may:
● Click the Help button at anytime to be taken to the Help System.
● Visit www.cirris.com/learning-center to read articles on Cirris software and other testing subjects.
● Contact our technical support team:
○ In the USA, call 1-800-441-9910 toll-free.
○ Outside the USA, visit our Cirris website at www.cirris.com to nd the Cirris oce nearest to you.
1.4 Optional Parts
You can purchase Add-on scanners to expand the tester up to a total of 1024 test points in 128-point increments. You can
also purchase adapters for connecting your device-under-test to the tester. You may have received the optional parts be-
low:
● Add-on Scanner(s): Each Add-on scanner provides 128 test points. Connect up to seven scanners for a total of 1024