Chapter 2 Specifying the CSS Boot Configuration
Where to Go Next
2-20
Cisco Content Services Switch Administration Guide
OL-5647-02
Showing Network Boot Configurations
Use the show version command to display the network boot configuration. For
example:
(config)# show version
Version: sg0730002 (7.30.0.02)
Network Path: e:/adi_directory/
Config Path: e:/adi_directory/
Flash (Locked): 7.20.0.03
Flash (Operational):7.30.0.02
Type: PRIMARY
Licensed Cmd Set(s):Standard Feature Set
Enhanced Feature Set
Secure Management
Note Use the version command in SuperUser mode to display the network boot
configuration.
To display network boot configuration information, use the show boot-config
command. For example:
(config)# show boot-config
!*********************** BOOT CONFIG ***********************
secondary config-path e:/adi_directory/
secondary boot-type boot-via-network Secondary-Boot
primary boot-file sg0730002
primary boot-type boot-via-network
subnet mask 255.0.0.0
ip address 192.168.4.226
Where to Go Next
Chapter 3, Configuring User Profiles, provides information about how to
configure CSS user profiles in the default-profile file.