Cisco 11503 - CSS Content Services Switch User Manual

2-9
Cisco Content Services Switch Administration Guide
OL-5647-02
Chapter 2 Specifying the CSS Boot Configuration
Specifying the Secondary Boot Configuration
• Create an FTP record on the CSS to the directory that contains the CSS
software on the network drive.
Note Be aware of the following network boot restrictions: a network boot is not
supported on UNIX workstations, and the War-FTP daemon is not supported for
network-booting the system software.
A network boot requires that the CSS contains an operational disk.
Specifying the Secondary Configuration Path
An alternate configuration path allows multiple CSSs to use the same boot image
while keeping their configuration information in separate directories. Use the
secondary config-path command to specify the alternate path to a network
configuration for the network boot method. Note that the CSS must be able to
access the configuration path through an FTP server as defined through the FTP
record for the network boot method.
When using an alternate configuration path, make sure the path leads to a
directory containing the script, log, and information subdirectories, and to the
startup-config file. These subdirectories must contain the files in the
corresponding subdirectories of the unzipped boot image. First, create these
subdirectories on the FTP server, then copy the files from the boot image to the
subdirectories.
Enter the configuration pathname as an unquoted text string with no spaces and a
maximum of 64 characters.
To configure the secondary configuration path, enter:
(config-boot)# secondary config-path f:/bootdir/
To remove the secondary network configuration path, enter:
(config-boot)# no secondary config-path

Cisco 11503 - CSS Content Services Switch Specifications

General

Brand	Cisco
Model	11503 - CSS Content Services Switch
Category	Switch
Language	English