Cisco 11503 - CSS Content Services Switch User Manual

Chapter 4 Using the CSS Logging Features
Showing Log Files
4-20
Cisco Content Services Switch Administration Guide
OL-5647-02
To send the log activity to your current session, enter:
# show log
Displaying Log events.
Press any key to abort...
APR 14 16:28:09 5/1 2398 NETMAN-7: HTTPC:HTTPC_Open:
ERROR->connect <-1,0> <192.20.1.7> <80>
APR 14 16:28:15 5/1 2399 NETMAN-7: HTTPC:HTTPC_Open:
ERROR->connect <-1,0> <192.20.1.7> <80>
APR 14 16:28:21 5/1 2400 NETMAN-7: HTTPC:HTTPC_Open:
ERROR->connect <-1,0> <192.20.1.7> <80>
APR 14 16:28:27 5/1 2401 NETMAN-7: HTTPC:HTTPC_Open:
ERROR->connect <-1,0> <192.20.1.7> <80>
To display information in a specific log file, enter the show log command with a
valid log filename. For example:
# show log stubs
SEP 22 09:59:18 5/1 918 NETMAN-7: SNMP:SET RSP (3803)
SEP 22 09:59:53 5/1 919 NETMAN-7: SNMP:SET (3804)
SEP 22 09:59:53 5/1 920 NETMAN-7: SNMP: 1
apLogHostIpAddress.[1.2.3.4] VT_IPADDRESS <1.2.3.4>
SEP 22 09:59:53 5/1 921 NETMAN-7: SNMP: 2
apLogHostIpAddress.[1.2.3.4] VT_IPADDRESS <1.2.3.4>
To view the content of the sys.log file, enter:
(config)# show log sys.log
To view the bottom and most recent portion of the file, use the tail option with the
show log command. For example, to view the most recent 500 lines in the sys.log
file, enter:
(config)# show log sys.log tail 500
Showing Log Lists
Use the show log-list command to display a list of all log files. You can use the
show log-list command in all modes, including User mode. For example:
(config)# show log-list

Cisco 11503 - CSS Content Services Switch Specifications

General

Brand	Cisco
Model	11503 - CSS Content Services Switch
Category	Switch
Language	English