Cisco 11503 - CSS Content Services Switch User Manual

Appendix B Using the Offline Diagnostic Monitor Menu
B-6
Cisco Content Services Switch Administration Guide
OL-5647-02
Setting Primary Boot Configuration
The information you provide for the primary boot configuration specifies the
location from which the CSS accesses the primary boot image upon system reboot
or when you download new software. When you select Set Primary Boot
Configuration from the Boot Configuration menu, the CSS displays the
following information. If you have previously entered information, the CSS
displays the existing information and default values in square brackets [ ].
Configuring PRIMARY Boot Record
Boot via [N]etwork, [F]TP, [D]isk, or [C]lear: [D]
Press <Enter> to continue...
• Boot via Network - Allows you to boot the CSS using FTP from CSS software
on a network-mounted file system on a remote system
• Boot via FTP - Allows you to download an ADI file containing CSS software
that you want to install on the CSS disk (hard or Flash disk)
• Boot via Disk - Allows you to boot the CSS from software currently on the
CSS disk (hard or Flash disk)
• Boot via Clear - Instructs the CSS to boot the CSS from the secondary boot
record
This section includes the following topics:
• Specifying a Network-Mounted File System as the Primary Boot Record
• Specifying FTP as the Primary Boot Record
• Specifying Disk as the Primary Boot Record
• Specifying Clear as the Primary Boot Record

Cisco 11503 - CSS Content Services Switch Specifications

General

Brand	Cisco
Model	11503 - CSS Content Services Switch
Category	Switch
Language	English