Cisco 11503 - CSS Content Services Switch User Manual

1-33
Cisco Content Services Switch Administration Guide
OL-5647-02
Chapter 1 Managing the CSS Software
Showing CSS Configurations
Copying Core Dumps to a TFTP Server
Use the copy core tftp command to copy a core dump to an TFTP server. This
command is available only in SuperUser mode.
The syntax for this command is:
copy core coredump_filename tftp ip_address_hostname filename
The variables are as follows:
• coredump_filename - The name of the core dump on the CSS. Enter an
unquoted text string with no spaces and a maximum of 32 characters.
• ip_address_hostname - The IP address or host name of the TFTP server to
receive the file. Enter an IP address in dotted-decimal notation (for example,
192.168.11.1) or in mnemonic host-name format (for example,
myhost.mydomain.com). If you wish to use a host name, you must first set up
a host table using the host command.
• filename - The name you want to assign to the file on the TFTP server.
Include the full path to the file. Enter an unquoted text string with no spaces
and a maximum of 32 characters.
Showing CSS Configurations
The CSS CLI provides a comprehensive set of show commands that display CSS
configurations. The show commands are mode-independent; that is, they are
available in each mode. The CSS does not show configuration default values in
the individual show output, even when you specify a CLI command to configure
a default value.
To display the list of show commands, enter:
(config)# show ?
This section includes the following topics:
• Showing Software Information
• Showing Hardware Information
• Showing System Resources
• Showing System Uptime
• Showing Disk Information

Cisco 11503 - CSS Content Services Switch Specifications

General

Brand	Cisco
Model	11503 - CSS Content Services Switch
Category	Switch
Language	English