Cisco 11503 - CSS Content Services Switch User Manual

Chapter 3 Configuring User Profiles
Changing the CLI Prompt
3-10
Cisco Content Services Switch Administration Guide
OL-5647-02
Changing the CLI Prompt
The CLI default prompt appears as the CSS product model number followed by
the number (#) symbol. The CSS adds a # to the prompt automatically to indicate
SuperUser mode. To change the default prompt, enter the prompt command. For
example:
CSS11506# prompt CSS1-lab
CSS1-lab#
You can enter a maximum of 15 characters.
To save the new prompt, add it to your user- or default-profile file. To restore the
prompt to the default, use the no form of the prompt command.
For example:
CSS11506# no prompt
Modifying the History Buffer
The history buffer stores 20 lines of the most recent CLI commands that you enter.
Use the history command to modify the CLI history buffer length. Enter the
number of lines you want in the history buffer as an integer from 0 to 256. The
default is 20. This command is available only in SuperUser mode.
To set the history buffer to 80 lines, enter:
# history length 80
To disable the history function (setting of 0), enter:
# history length 0
To restore the history buffer to the default of 20 lines, enter:
# no history length

Cisco 11503 - CSS Content Services Switch Specifications

General

Brand	Cisco
Model	11503 - CSS Content Services Switch
Category	Switch
Language	English