Cisco 11503 - CSS Content Services Switch User Manual

4-37
Cisco Content Services Switch Administration Guide
OL-5647-02
Chapter 4 Using the CSS Logging Features
Frequently Queried Log Messages
circuit Subsystem
CIRCUIT-7: Circuit status
message for circuit 1023 sent to
CE 20202c01 cause code is 7
Codes indicate the status of interfaces
within VLANs. The logical port cause
and command codes are as follows:
Cause Code
CM_CIRCUIT_CREATED 1
CM_IP_REGISTER 2
CM_IP_NOT_REGISTER 3
CM_IP_MODIFIED 4
CM_LP_STATE_CHG 5
CM_CIRCUIT_REMOVED 6
CM_LP_ADDED 7
CM_LP_REMOVED 8
CM_LP_MODIFIED 9
CM_LP_FAILOVER 10
CM_CIRCUIT_DOWN 11
This log message indicates that a port
has been added to a VLAN. This log
message can occur when the
association to a VLAN changes as the
port transitions from an up to a down
state.
Use the show circuit command to list
the VLANs (refer to the Cisco Content
Services Switch Routing and Bridging
Guide). Check the status of the ports of
the VLAN or determine whether the
VLAN is active.
Table 4-8 Cisco 11500 Series CSS Log Messages (continued)
Log Message (sys.log: Subsystem
Name, Level, and Message) Cause and Resolution

Cisco 11503 - CSS Content Services Switch Specifications

General

Brand	Cisco
Model	11503 - CSS Content Services Switch
Category	Switch
Language	English