Appendix A Upgrading Your CSS Software
Upgrading Your CSS Software
A-12
Cisco Content Services Switch Administration Guide
OL-5647-02
unpacking(/) 99%
(config-boot)#
The upgrade script copies the scripts and user profiles from the old script
directory to the directory of the new software image. Note that script_name
is the name of the current script being copied.
Copying scripts from c:/sg0730002/script/ to c:/sg0740002/script/
Working (/)
Copying
script_name
... Done
Note If the copy operation fails, the CSS displays the following messages and
then exits the upgrade process:
Error: Copy of
script_name
failed!
Script copy failed, upgrade aborted!
If an old script has the same name as a Cisco-supplied script but its contents
differ, the following message appears:
script_name
differs between images
The upgrade script does not overwrite the Cisco-supplied scripts in the script
directory of the new software image with the older versions of the scripts,
except the default-profile script. If the upgrade process detects an older
version of the default-profile script, the script renames the newer
default-profile script as default-profile.new and then copies the older version
of the default-profile script to the script directory of the new software image.
For example:
Saving c:/sg0740002/script/default-profile.new... Done
Copying default-profile to new image... Done
Then the upgrade script sets the ADI as the primary boot file.
setting primary boot-file sg0740002
To Next Page
Loading...
