Cisco 11503 - CSS Content Services Switch - Page 360

Appendix B Using the Offline Diagnostic Monitor Menu
B-10
Cisco Content Services Switch Administration Guide
OL-5647-02
2. Enter one of the following:
• y to copy the boot image from the FTP server to the disk. The CSS
accesses the boot image directly from the disk at the next reboot. The
CSS also changes the information in the primary boot record to Disk.
• n to FTP the boot image from the FTP server at the next reboot.
3. Press Enter to display the Boot Configuration menu.
4. Enter r to display the Offline DM Main menu.
5. Select option 4 to reboot the CSS.
When the CSS completes the current boot process, it:
• Accesses the ADI file from the FTP server and unpacks (uncompresses) the
file
• Boots the CSS using the boot image you specified
Specifying Disk as the Primary Boot Record
When you select Disk as the primary boot record, the CSS displays all boot image
versions that reside on the disk. For example:
sg0730002
sg0720104
1. Enter the boot image filename you wish to use at the prompt.
Enter the boot image filename: sg0730002
2. Press Enter to display the Boot Configuration menu.
Press <Enter> to continue...
3. Press r to display the Offline DM Main menu.
4. Select option 4 to reboot the CSS. Upon reboot, the CSS boots up using the
boot image you specified.
Specifying Clear as the Primary Boot Record
To use the secondary boot record information instead of the primary boot record
to boot the CSS:
1. Select Clear as the primary boot record.
2. Press Enter to display the Boot Configuration menu.