Cisco 11503 - CSS Content Services Switch User Manual

Appendix B Using the Offline Diagnostic Monitor Menu
B-22
Cisco Content Services Switch Administration Guide
OL-5647-02
3. Press Enter to continue.
The CSS prompts you to format the disk.
Formatting the disk results in all disk data being permanently
erased.
Are you sure you want to continue? (yes,no):
4. Enter one of the following:
• yes to reformat the disk.
• no to stop the reformat function. If the disk has unrecoverable errors and
you do not reformat it, be aware that the file system may be corrupted and
functionality compromised.
The CSS prompts you to perform a quick format or a complete format.
Quick format? (yes,no):
5. Enter one of the following:
• yes to reformat the disk using the quick format (does not perform cluster
verification). Use the quick format only when you are certain of the disk
integrity.
• no to reformat the disk including cluster verification.
After the CSS reformats the disk, it displays:
Operation completed successfully.
6. Enter r to return to the Advanced Options menu.
7. Enter r to return to the Offline DM Main menu.
Because the disk is empty, you must configure a primary boot record to
instruct the CSS where to locate the new ADI file containing the CSS
software.
8. Select option 1 to set the primary boot configuration (see the “Setting Primary
Boot Configuration” section).
If you do not set the primary boot configuration before booting the CSS, the
boot process halts at the prompt:
Would you like to access the Offline Diagnostic Monitor
menu?(y<cr>)
You must enter the Offline DM Main menu to set the primary boot
configuration.

Cisco 11503 - CSS Content Services Switch Specifications

General

Brand	Cisco
Model	11503 - CSS Content Services Switch
Category	Switch
Language	English