Cisco 3032 - Page 28

Contents
xxviii
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-12247-04
Setting the Message Display Destination Device 32-5
Synchronizing Log Messages 32-6
Enabling and Disabling Time Stamps on Log Messages 32-8
Enabling and Disabling Sequence Numbers in Log Messages 32-8
Defining the Message Severity Level 32-9
Limiting Syslog Messages Sent to the History Table and to SNMP 32-10
Enabling the Configuration-Change Logger 32-11
Configuring UNIX Syslog Servers 32-12
Logging Messages to a UNIX Syslog Daemon 32-13
Configuring the UNIX System Logging Facility 32-13
Displaying the Logging Configuration 32-14
CHAPTER 33 Configuring SNMP 33-1
Understanding SNMP 33-1
SNMP Versions 33-2
SNMP Manager Functions 33-3
SNMP Agent Functions 33-4
SNMP Community Strings 33-4
Using SNMP to Access MIB Variables 33-4
SNMP Notifications 33-5
SNMP ifIndex MIB Object Values 33-5
Configuring SNMP 33-6
Default SNMP Configuration 33-6
SNMP Configuration Guidelines 33-6
Disabling the SNMP Agent 33-7
Configuring Community Strings 33-8
Configuring SNMP Groups and Users 33-9
Configuring SNMP Notifications 33-11
Setting the CPU Threshold Notification Types and Values 33-15
Setting the Agent Contact and Location Information 33-16
Limiting TFTP Servers Used Through SNMP 33-16
SNMP Examples 33-17
Displaying SNMP Status 33-18