Contents
xxix
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-12247-04
CHAPTER
33 Configuring Embedded Event Manager 33-1
Understanding Embedded Event Manager 33-1
Event Detectors 33-2
Embedded Event Manager Actions 33-4
Embedded Event Manager Policies 33-4
Embedded Event Manager Environment Variables 33-4
Configuring Embedded Event Manager 33-5
Registering and Defining an Embedded Event Manager Applet 33-5
Registering and Defining an Embedded Event Manager TCL Script 33-6
Displaying Embedded Event Manager Information 33-7
CHAPTER
34 Configuring Network Security with ACLs 34-1
Understanding ACLs 34-1
Supported ACLs 34-2
Port ACLs 34-3
Router ACLs 34-4
VLAN Maps 34-5
Handling Fragmented and Unfragmented Traffic 34-5
ACLs and Switch Stacks 34-6
Configuring IPv4 ACLs 34-7
Creating Standard and Extended IPv4 ACLs 34-8
Access List Numbers 34-8
ACL Logging 34-9
Creating a Numbered Standard ACL 34-10
Creating a Numbered Extended ACL 34-11
Resequencing ACEs in an ACL 34-15
Creating Named Standard and Extended ACLs 34-15
Using Time Ranges with ACLs 34-17
Including Comments in ACLs 34-19
Applying an IPv4 ACL to a Terminal Line 34-19
Applying an IPv4 ACL to an Interface 34-20
Hardware and Software Treatment of IP ACLs 34-22
Troubleshooting ACLs 34-22
To Next Page
Loading...
