Cisco 3032 - Page 30

Contents
xxx
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-12247-04
IPv4 ACL Configuration Examples 34-23
Numbered ACLs 34-25
Extended ACLs 34-25
Named ACLs 34-26
Time Range Applied to an IP ACL 34-26
Commented IP ACL Entries 34-27
ACL Logging 34-27
Creating Named MAC Extended ACLs 34-28
Applying a MAC ACL to a Layer 2 Interface 34-29
Configuring VLAN Maps 34-30
VLAN Map Configuration Guidelines 34-31
Creating a VLAN Map 34-32
Examples of ACLs and VLAN Maps 34-33
Applying a VLAN Map to a VLAN 34-35
Using VLAN Maps in Your Network 34-35
Denying Access to a Server on Another VLAN 34-35
Using VLAN Maps with Router ACLs 34-36
VLAN Maps and Router ACL Configuration Guidelines 34-36
Examples of Router ACLs and VLAN Maps Applied to VLANs 34-37
ACLs and Switched Packets 34-37
ACLs and Bridged Packets 34-38
ACLs and Routed Packets 34-39
ACLs and Multicast Packets 34-39
Displaying IPv4 ACL Configuration 34-40
CHAPTER 35 Configuring IPv6 ACLs 35-1
Understanding IPv6 ACLs 35-1
Supported ACL Features 35-2
IPv6 ACL Limitations 35-2
IPv6 ACLs and Switch Stacks 35-3
Configuring IPv6 ACLs 35-3
Default IPv6 ACL Configuration 35-4
Interaction with Other Features and Switches 35-4
Creating IPv6 ACLs 35-4
Applying an IPv6 ACL to an Interface 35-8
Displaying IPv6 ACLs 35-9