Cisco 3032 - Page 34

Contents
xxxiv
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-12247-04
CHAPTER 38 Configuring IP Unicast Routing 38-1
Understanding IP Routing 38-2
Types of Routing 38-2
IP Routing and Switch Stacks 38-3
Steps for Configuring Routing 38-5
Configuring IP Addressing 38-5
Default Addressing Configuration 38-6
Assigning IP Addresses to Network Interfaces 38-7
Use of Subnet Zero 38-7
Classless Routing 38-8
Configuring Address Resolution Methods 38-9
Define a Static ARP Cache 38-10
Set ARP Encapsulation 38-11
Enable Proxy ARP 38-12
Routing Assistance When IP Routing is Disabled 38-12
Proxy ARP 38-12
Default Gateway 38-12
ICMP Router Discovery Protocol (IRDP) 38-13
Configuring Broadcast Packet Handling 38-14
Enabling Directed Broadcast-to-Physical Broadcast Translation 38-15
Forwarding UDP Broadcast Packets and Protocols 38-16
Establishing an IP Broadcast Address 38-16
Flooding IP Broadcasts 38-17
Monitoring and Maintaining IP Addressing 38-18
Enabling IP Unicast Routing 38-19
Configuring RIP 38-20
Default RIP Configuration 38-21
Configuring Basic RIP Parameters 38-21
Configuring RIP Authentication 38-24
Configuring Summary Addresses and Split Horizon 38-24
Configuring Split Horizon 38-26
Configuring OSPF 38-26
Default OSPF Configuration 38-28
OSPF Nonstop Forwarding 38-29
Configuring Basic OSPF Parameters 38-30
Configuring OSPF Interfaces 38-31