Contents
xxxv
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-12247-04
Configuring OSPF Area Parameters 38-32
Configuring Other OSPF Parameters 38-33
Changing LSA Group Pacing 38-35
Configuring a Loopback Interface 38-35
Monitoring OSPF 38-36
Configuring EIGRP 38-37
Default EIGRP Configuration 38-38
EIGRP Nonstop Forwarding 38-40
Configuring Basic EIGRP Parameters 38-41
Configuring EIGRP Interfaces 38-42
Configuring EIGRP Route Authentication 38-42
EIGRP Stub Routing 38-43
Monitoring and Maintaining EIGRP 38-44
Configuring BGP 38-46
Default BGP Configuration 38-48
Nonstop Forwarding Awareness 38-50
Enabling BGP Routing 38-50
Managing Routing Policy Changes 38-53
Configuring BGP Decision Attributes 38-54
Configuring BGP Filtering with Route Maps 38-56
Configuring BGP Filtering by Neighbor 38-57
Configuring Prefix Lists for BGP Filtering 38-58
Configuring BGP Community Filtering 38-59
Configuring BGP Neighbors and Peer Groups 38-61
Configuring Aggregate Addresses 38-63
Configuring Routing Domain Confederations 38-63
Configuring BGP Route Reflectors 38-64
Configuring Route Dampening 38-65
Monitoring and Maintaining BGP 38-66
Configuring ISO CLNS Routing 38-67
Configuring IS-IS Dynamic Routing 38-68
Default IS-IS Configuration 38-69
Nonstop Forwarding Awareness 38-69
Enabling IS-IS Routing 38-70
Configuring IS-IS Global Parameters 38-71
Configuring IS-IS Interface Parameters 38-74
Monitoring and Maintaining ISO IGRP and IS-IS 38-76
To Next Page
Loading...
