Contents
xxxvi
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-12247-04
Configuring Multi-VRF CE 38-77
Understanding Multi-VRF CE 38-78
Default Multi-VRF CE Configuration 38-80
Multi-VRF CE Configuration Guidelines 38-80
Configuring VRFs 38-81
Configuring VRF-Aware Services 38-82
User Interface for ARP 38-82
User Interface for PING 38-82
User Interface for SNMP 38-83
User Interface for HSRP 38-83
User Interface for uRPF 38-83
User Interface for Syslog 38-84
User Interface for Traceroute 38-84
User Interface for FTP and TFTP 38-85
Configuring Multicast VRFs 38-85
Configuring a VPN Routing Session 38-86
Configuring BGP PE to CE Routing Sessions 38-87
Multi-VRF CE Configuration Example 38-87
Displaying Multi-VRF CE Status 38-91
Configuring Unicast Reverse Path Forwarding 38-92
Configuring Protocol-Independent Features 38-92
Configuring Cisco Express Forwarding and Distributed Cisco Express Forwarding 38-92
Configuring the Number of Equal-Cost Routing Paths 38-94
Configuring Static Unicast Routes 38-95
Specifying Default Routes and Networks 38-96
Using Route Maps to Redistribute Routing Information 38-96
Configuring Policy-Based Routing 38-100
PBR Configuration Guidelines 38-101
Enabling PBR 38-102
Filtering Routing Information 38-104
Setting Passive Interfaces 38-104
Controlling Advertising and Processing in Routing Updates 38-105
Filtering Sources of Routing Information 38-106
Managing Authentication Keys 38-106
Monitoring and Maintaining the IP Network 38-108
To Next Page
Loading...
