Cisco 3032 - Page 37

Contents
xxxvii
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-12247-04
CHAPTER 39 Configuring IPv6 Unicast Routing 39-1
Understanding IPv6 39-1
IPv6 Addresses 39-2
Supported IPv6 Unicast Routing Features 39-2
128-Bit Wide Unicast Addresses 39-4
DNS for IPv6 39-4
Path MTU Discovery for IPv6 Unicast 39-4
ICMPv6 39-4
Neighbor Discovery 39-4
Default Router Preference 39-5
IPv6 Stateless Autoconfiguration and Duplicate Address Detection 39-5
IPv6 Applications 39-5
Dual IPv4 and IPv6 Protocol Stacks 39-5
DHCP for IPv6 Address Assignment 39-6
Static Routes for IPv6 39-6
RIP for IPv6 39-7
OSPF for IPv6 39-7
EIGRP for IPv6 39-7
HSRP for IPv6 39-7
SNMP and Syslog Over IPv6 39-7
HTTP(S) Over IPv6 39-8
Unsupported IPv6 and Unicast Routing Features 39-8
Limitations 39-9
IPv6 and Switch Stacks 39-9
Configuring IPv6 39-11
Default IPv6 Configuration 39-11
Configuring IPv6 Addressing and Enabling IPv6 Host Functions or Routing 39-12
Configuring Default Router Preference 39-14
Configuring IPv4 and IPv6 Protocol Stacks 39-15
Configuring DHCP for IPv6 Address Assignment 39-16
Default DHCPv6 Address Assignment Configuration 39-16
DHCPv6 Address Assignment Configuration Guidelines 39-16
Enabling DHCPv6 Server Function 39-17
Enabling DHCPv6 Client Function 39-19
Configuring IPv6 ICMP Rate Limiting 39-19
Configuring CEF and dCEF for IPv6 39-20