Cisco 3032 - Page 38

Contents
xxxviii
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-12247-04
Configuring Static Routes for IPv6 39-20
Configuring RIP for IPv6 39-22
Configuring OSPF for IPv6 39-23
Configuring EIGRP for IPv6 39-25
Configuring HSRP for IPv6 39-25
Enabling HSRP Version 2 39-26
Enabling an HSRP Group for IPv6 39-26
Displaying IPv6 39-27
CHAPTER 40 Configuring HSRP 40-1
Understanding HSRP 40-1
HSRP Versions 40-3
Multiple HSRP 40-4
HSRP and Switch Stacks 40-5
Configuring HSRP 40-5
Default HSRP Configuration 40-6
HSRP Configuration Guidelines 40-6
Enabling HSRP 40-7
Configuring HSRP Priority 40-8
Configuring MHSRP 40-10
Configuring HSRP Authentication and Timers 40-11
Enabling HSRP Support for ICMP Redirect Messages 40-12
Displaying HSRP Configurations 40-12
CHAPTER 41 Configuring Cisco IOS IP SLAs Operations 41-1
Understanding Cisco IOS IP SLAs 41-1
Using Cisco IOS IP SLAs to Measure Network Performance 41-2
IP SLAs Responder and IP SLAs Control Protocol 41-3
Response Time Computation for IP SLAs 41-4
IP SLAs Operation Scheduling 41-5
IP SLAs Operation Threshold Monitoring 41-5
Configuring IP SLAs Operations 41-6
Default Configuration 41-6
Configuration Guidelines 41-6
Configuring the IP SLAs Responder 41-7
Analyzing IP Service Levels by Using the UDP Jitter Operation 41-8
Analyzing IP Service Levels by Using the ICMP Echo Operation 41-10
Monitoring IP SLAs Operations 41-13