Cisco 4400 Series User Manual

8-9
Cisco Wireless LAN Controller Configuration Guide
OL-17037-01
Chapter 8 Controlling Mesh Access Points
Architecture Overview
• Number of MAPs per RAP
There is no current software limitation of how many MAPs per RAP you can configure. However,
it is suggested that you limit this to 20 MAPs per RAP.
• Number of controllers
– The number of controllers per mobility group is limited to 72.
• Number of mesh access points supported per controller (see Table 8-3).
Table 8-3 Mesh Access Point Support by Controller Model
Controller
Model
Local AP
Support
(non-mesh)
Maximum
Possible
Mesh AP
Support RAPs MAPs
1
Total Mesh
AP Support
4404 100 150 1 149 150
50 100 150
75 50 125
100 0 100
2106 6 11
2
11011
2810
369
448
527
606
2112 12 12 1 11
3
12
3912
6612
9312
12 0 12
2125 25 25 1 24
3
25
52025
10 15 25
15 10 25
20 5 25
25 0 25
WiSM 300 375 1 374 375
100 275 375
250 100 350
300 0 300
1. Number of MAPs supported on a mesh network is equal to the ((local AP support - number of RAPs) x 2). Local
AP support is the total number of non-mesh APs supported on the controller model.
2. For 2106 controllers, the mesh access point limit is equal to [(local AP support - 1) x 2) +1].
3. For 2112 and 2125 controllers, the number of MAPs = (Total number of local APs - number of RAPs).

Cisco 4400 Series Specifications

General

Brand	Cisco
Model	4400 Series
Category	Controller
Language	English