Cisco 4400 Series User Manual

8-40
Cisco Wireless LAN Controller Configuration Guide
OL-17037-01
Chapter 8 Controlling Mesh Access Points
Viewing Mesh Statistics and Reports
Step 2 To view statistics for a specific access point, hover your cursor over the blue drop-down arrow for the
desired access point and choose Statistics. The All APs > Access Point Name > Statistics page for the
access point appears (see Figure 8-19).
Figure 8-19 All APs > Access Point Name > Statistics Page
This page shows the role of the access point in the mesh network, the name of the bridge group to which
the access point belongs, the backhaul interface on which the access point operates, and the number of
the physical switch port. It also displays a variety of mesh statistics for this access point. Table 8-7
describes each of the statistics.

Cisco 4400 Series Specifications

General

Product Type	Wireless LAN Controller
Manageable	Yes
Management Port	Yes
Power over Ethernet (PoE)	No
Operating Temperature	32 to 104°F (0 to 40°C)
Security	WPA, WPA2, 802.1X, AES, TKIP
Power Supply	AC Power Supply
Wireless LAN Standard	IEEE 802.11a/b/g/n
Form Factor	Rack-mountable
Redundancy	Yes
Operating Humidity	10% to 90% non-condensing