Send document comments to nexus7k-docfeedback@cisco.com
Contents
x
Cisco Nexus 7000 Series NX-OS Interfaces Configuration Guide, Release 5.x
OL-23435-03
Path MTU Discovery 8-3
Virtualization Support 8-3
High Availability 8-3
Licensing Requirements for IP Tunnels 8-3
Prerequisites for IP Tunnels 8-4
Guidelines and Limitations 8-4
Default Settings 8-4
Configuring IP Tunnels 8-4
Enabling Tunneling 8-5
Creating a Tunnel Interface 8-5
Configuring a GRE Tunnel 8-7
Enabling Path MTU Discovery 8-8
Assigning VRF Membership to a Tunnel Interface 8-8
Verifying the IP Tunnel Configuration 8-10
Configuration Examples for IP Tunneling 8-10
Additional References 8-11
Related Documents 8-11
Standards 8-11
Feature History for Configuring IP Tunnels 8-11
CHAPTER
9 Configuring Q-in-Q VLAN Tunnels 9-1
Information About Q-in-Q Tunnels 9-1
Q-in-Q Tunneling 9-1
Native VLAN Hazard 9-3
Information About Layer 2 Protocol Tunneling 9-4
Licensing Requirements for Q-in-Q Tunnels 9-7
Guidelines and Limitations 9-7
Configuring Q-in-Q Tunnels and Layer 2 Protocol Tunneling 9-7
Creating a 802.1Q Tunnel Port 9-8
Changing the EtherType for Q-in-Q 9-9
Enabling the Layer 2 Protocol Tunnel 9-11
Configuring Global CoS for L2 Protocol Tunnel Ports 9-12
Configuring the Rate Limit for Layer 2 Protocol Tunnel Ports 9-13
Configuring Thresholds for Layer 2 Protocol Tunnel Ports 9-14
Verifying the Q-in-Q Configuration 9-16
Configuration Examples for Q-in-Q and Layer 2 Protocol Tunneling 9-16
Feature History for Q-in-Q Tunnels and Layer 2 Protocol Tunneling 9-17
To Next Page
Loading...
