Cisco 7206 - VXR Router User Manual

Send document comments to nexus7k-docfeedback@cisco.com
xiv
Cisco Nexus 7000 Series NX-OS Interfaces Configuration Guide, Release 5.x
OL-23435-03
New and Changed Information
Inband Management in
the Nexus Chassis
Configures inband management in the Cisco
Nexus 7000 switches when there are only F1
series module in the chassis.
5.1(1) Chapter 4, “Configuring Layer 3
Interfaces”
F1 series modules and M1
series modules for the
port channel
Supports bundling of 16 active ports
simultaneously into a port channel on the F
series module. On the M Series module, you
can bundle up to 8 active and 8 standby.
5.1(1) Chapter 6, “Configuring Port
Channels”
LACP Port-Channel
MinLinks and
MaxBundle
Configures LACP port-channel minlinks and
LACP port-channel maxbundle.
5.1(1) Chapter 6, “Configuring Port
Channels”
BFD Makes network profiling and planning easier
and reconvergence time consistent and
predictable.
5.0(2) Chapter 5, “Configuring
Bidirectional Forwarding
Detection”
Q-in-Q Tunneling Enables the segregation of traffic for different
customers while still giving you a full range of
VLANs for your use.
5.0(2) Chapter 9, “Configuring Q-in-Q
VLAN Tunnels”
vPC and STP
Convergence
Supports bringing up the vPC on a switch
when its peer fails to function. Enables the
vPC switch pair to appear as a single STP root
in the Layer 2 topology.
5.0(2) Chapter 7, “Configuring vPCs”
Table 1 New and Changed Features for Cisco NX--OS Release 5.x (continued)
Feature Description
Changed in
Release Where Documented

Cisco 7206 - VXR Router Specifications

General

Brand	Cisco
Model	7206 - VXR Router
Category	Network Router
Language	English