Cisco 7206 - VXR Router User Manual

Send document comments to nexus7k-docfeedback@cisco.com
7-47
Cisco Nexus 7000 Series NX-OS Interfaces Configuration Guide, Release 5.x
OL-23435-03
Chapter 7 Configuring vPCs
Configuring vPCs
BEFORE YOU BEGIN
Ensure that you have enabled the vPC feature.
Ensure that you are in the correct virtual device context (VDC) (or use the switchto vdc command).
Ensure that you have configured the track object and the track list. Ensue that you assign all interfaces
that connect to the core and to the vPC peer link to the track-list object on both vPC peer devices.
SUMMARY STEPS
1. configure terminal
2. vpc domain domain-id
3. track track-object-id
4. exit
5. (Optional) show vpc
6. (Optional) copy running-config startup-config
DETAILED STEPS
Command Purpose
Step 1
configure terminal
Example:
switch# configure terminal
switch(config)#
Enters global configuration mode.
Step 2
vpc domain domain-id
Example:
switch(config)# vpc domain 5
switch(config-vpc-domain)#
Enters the vPC domain number that you want to
configure. The system enters the vpc-domain
configuration mode.
Step 3
track track-object-id
Example:
switch(config-vpc-domain)# track object 23
switch(config-vpc-domain)#
Adds the previously configured track-list object
with its associated interfaces to the vPC domain. See
the Cisco Nexus 7000 Series NX-OS Unicast Routing
Configuration Guide, Release 5.x, for information
on configuring object tracking and track lists.
Step 4
exit
Example:
switch(config-vpc-domain)# exit
switch(config)#
Exits the vpc-domain configuration mode.
Step 5
show vpc brief
Example:
switch# show vpc brief
(Optional) Displays information on the tracked
objects.
Step 6
copy running-config startup-config
Example:
switch# copy running-config startup-config
(Optional) Copies the running configuration to the
startup configuration.

Cisco 7206 - VXR Router Specifications

General

Brand	Cisco
Model	7206 - VXR Router
Category	Network Router
Language	English