Cisco 7906G User Giude

Basic Call Handling
Cisco Unified IP Phone Guide for Cisco Unified Communications Manager 8.5(1) (SCCP and SIP) 21
Viewing Multiple Calls
Understanding how multiple calls are displayed on your phone can help you organize your
call-handling efforts.
Your phone displays calls as follows for the highlighted line:
• Calls with the highest precedence and longest duration display at the top of the list.
• Calls of a similar type are grouped together. For example, calls that you have interacted with are
grouped near the top, and calls on hold are grouped last.
Transferring Calls
Transfer redirects a connected call. The target is the number to which you want to transfer the call.
Switch an in-progress
call from a mobile
phone to your desktop
phone
1. Hang up the call on your mobile phone to disconnect the mobile
phone, but not the call.
2. Press Answer softkey on your desk phone within 4 seconds and start
talking on the desk phone.
Switch an in-progress
call from a mobile
phone to a desk phone
sharing the same line
(Session Handoff)
1. While on your mobile phone, press the access code for the Session
Handoff feature (for example, *74). See your system administrator for
a list of access codes.
2. Hang up the call on your mobile phone to disconnect the mobile
phone, but not the call.
3. Press the Answer softkey on your desk phone within 10 seconds and
start talking on the desk phone. The number of seconds to answer the
call on your desk phone is set by your system administrator.
The other Cisco Unified devices that share the same line display a Remote
in Use message. The number of seconds to resume the call depends on the
configuration set by the system administrator.
If you want to... Then...
Transfer a call without
talking to the transfer
recipient
1. From an active call, press Transfer.
2. Enter the target number.
3. Press Transfer again to complete the transfer or EndCall to cancel.
Note If your phone has on-hook transfer enabled, complete the transfer
by hanging up.
If you want to... Then...

Cisco 7906G Specifications

General

Brand	Cisco
Model	7906G
Category	IP Phone
Language	English