40 OL-22336-01
Tips
• EM automatically logs you out after a certain amount of time. Your system administrator
establishes this time limit.
• Changes that you make to your EM profile from your Unified CM User Options web pages take
effect immediately if you are logged in to EM on the phone; otherwise, changes take effect the next
time you log in.
• Changes that you make to the phone from your User Options web pages take effect immediately
if you are logged out of EM; otherwise, changes take effect after you log out.
• Local settings controlled by the phone are not maintained in your EM profile.
Managing Business Calls Using a Single Phone Number
Intelligent Session Control associates your mobile phone number with your business IP phone number.
When you receive a call to your remote destination (mobile phone), your desk phone does not ring;
only your remote destination rings. When an incoming call is answered on the mobile phone, the desk
phone displays a Remote in Use message.
Change your PIN
using the Change
Credentials
service
1. Press and choose Services > Change Credentials.
2. Enter your User ID in the User ID field.
3. Enter your PIN in the Current PIN field.
4. Enter your new PIN in the New PIN field.
5. Enter your new PIN again in the Confirm PIN field.
6. Press Change.
You will see a PIN Change Successful message.
7. Press Exit.
Change your PIN
using the
ChangePIN
softkey
1. Press and choose Services > EM Service (name can vary).
2. Press ChangePIN.
3. Enter your PIN in the Current PIN field.
4. Enter your new PIN in the New PIN field.
5. Enter your new PIN again in the Confirm PIN field.
6. Press Change.
You will see a PIN Change Successful message.
7. Press Exit.
If you want to... Then...
To Next Page
Loading...
Need help?
General
