Basic Call Handling
Cisco Unified IP Phone Guide for Cisco Unified Communications Manager 8.5(1) (SCCP and SIP) 25
• When you switch an in-progress call from your mobile phone to Cisco Unified devices that share
the same line (Session Handoff), the DND feature is disabled on the Cisco Unified devices. The
DND feature returns when the call ends.
.
Making Conference Calls
Your Cisco Unified IP Phone allows you to talk simultaneously with multiple parties in a conference
call.
Using Conference Features
You can create a conference in various ways, depending on your needs and the features that are
available on your phone.
If you want to... Then...
Turn on DND Press DND.
“Do Not Disturb” displays on the status line, and the ring tone is
turned off.
Turn off DND Press the DND softkey or:
1. Press > Device Configuration > Call Preferences > Do Not
Disturb.
2. Select No, and then press Save.
Customize DND settings If your system administrator configured DND settings to appear on
the User Options page, follow these steps:
1. Log in to your User Options web pages. See Accessing Your User
Options Web Pages, page 59.
2. From the drop-down menu, choose User Options > Device.
3. You can set the following options:
–
Do Not Disturb—Set to enable/disable DND.
–
DND Option—Choose either Call Reject (to turn off all
audible and visual notifications) or Ringer Off (to turn off
only the ringer).
–
DND Incoming Call Alert (applies to either DND option
set)—Set the alert to beep only, flash only, disable the alert,
or choose “None” (to use the “Alert” setting configured by
your system administrator).
To Next Page
Loading...
Need help?
General
