To Next Page

To Previous Page

52 OL-22336-01

Dial from a call log

(while not on another

call)

1. Press and choose Directories > Missed Calls, Placed Calls, or

Received Calls.

2. Highlight a call record from the log.

Note If the Details softkey appears, the call is the primary entry of a multiparty

call. See the Tips section below.

3. If you need to edit the displayed number, press EditDial followed by <<

or >>. To delete the number, press EditDial followed by Delete. (You may

need to press the more softkey to display Delete.)

4. Go off-hook to place the call.

Dial from a call log

(while connected to

another call)

1. Press , and choose Directories > Missed Calls, Placed Calls, or

Received Calls.

2. Highlight a call record from the log.

Note If the Details softkey displays, the call is the primary entry of a multiparty

call. See the

Tips section below.

3. If you need to edit the displayed number, press EditDial followed by <<

or >>. To delete the number, press EditDial followed by Delete. (You may

need to press the more softkey to display Delete.)

4. Press Dial.

5. Choose one of the following to handle the original call:

–

Hold—Puts the first call on hold.

–

Transfer—Transfers the first party to the second and drops you from

the call. (Press Transfer again after dialing to complete the action.)

–

Confrn—Creates a conference call with all parties, including you.

(Press Confrn again after dialing to complete the action.)

–

EndCall—Disconnects the first call and dials the second.

If you want to... Then...

Cisco 7906G User Giude

Other manuals for Cisco 7906G