Basic Call Handling
Cisco Unified IP Phone 7931G for Cisco Unified Communications Manager 6.0 19
Tip
If parties on a call hear a beep tone, the call might be monitored or recorded. Ask your system
administrator for more information.
Ending a Call
To end a call, simply hang up. Here are some more details.
Use your phone to answer
a call ringing elsewhere
Use Call Pickup. Picking Up a Redirected Call
on Your Phone, page 31
Answer a priority call Hang up the current call and press
Answer.
Prioritizing Critical Calls,
page 37
Answer a call on your
cellular phone or other
remote destination
Set up Mobile Connect and answer your
phone.
When you enable Mobile Connect:
• Your desktop and remote
destinations receive calls
simultaneously.
• When you answer the call on your
desktop phone, the remote
destinations stop ringing, are
disconnected, and display a missed
call message.
• When you answer the call on one
remote destination, the other remote
destinations stop ringing, are
disconnected, and a missed call
message is shown on the other
remote destinations.
Managing Business Calls
Using a Single Phone Number,
page 39
If you want to... Then...
Hang up while using the handset Return the handset to its cradle. Or press EndCall.
Hang up while using a headset Press ( ). Or, to keep headset mode active, press
EndCall.
Hang up while using the speakerphone Press or EndCall.
If you want to... Then... For more information, see...
Dit document wordt u aangeboden door TelecomHunter. Dé zakelijke Telecom webshop.
T 088 7463 444 | @ sales@TelecomHunter.nl | www.TelecomHunter.nl