Cisco Unified IP Phone 7931G for Cisco Unified Communications Manager 6.0 1
Getting Started
Using this Guide
This guide provides you with an overview of the features available on your phone. You can read it
completely for a solid understanding of your phone’s capabilities or refer to the table below for
pointers to commonly used sections.
If you want to... Then
Explore your phone on your own Press ( ) > on the phone when you need assistance.
Review important safety information See Safety and Performance Information, page 2.
Connect your phone See Connecting Your Phone, page 4.
Use your phone after it is installed See An Overview of Your Phone, page 7.
Learn about the buttons and softkeys See Understanding Buttons and Hardware, page 7.
Make calls See Placing a Call—Basic Options, page 16.
Put calls on hold See Using Hold and Resume, page 20.
Mute calls See Using Mute, page 21.
Transfer calls See Transferring Calls, page 22.
Make conference calls See Making Conference Calls, page 26.
Set up speed dialing See Speed Dialing, page 30.
Share a phone number See Picking Up a Redirected Call on Your Phone, page 31.
User your phone as a speakerphone See Using a Handset, Headset, and Speakerphone, page 41.
Change the ring or call volume See Customizing Rings and Message Indicators, page 43.
View your missed calls See Using Call Logs, page 45.
Listen to your voice messages See Accessing Voice Messages, page 51.
See softkey and icon definitions Refer to the Quick Reference Card in the front of this guide.
Dit document wordt u aangeboden door TelecomHunter. Dé zakelijke Telecom webshop.
T 088 7463 444 | @ sales@TelecomHunter.nl | www.TelecomHunter.nl
To Next Page
Loading...
