Cisco 7941G Administration Guide

To ChangeDescriptionOption
Display only.Cannot configure.Displays the WAN IP address of the NAT
or firewall server. This value will always
be set to null.
NAT Address
From Cisco Unified Communications
Manager Administration, choose Device
> Device Settings > SIP Profile.
This value is set to No by default.Call Statistics
Related Topics
Display Settings Menu, on page 60
Device Configuration Menu, on page 84
Line Settings Menu for SIP Phones
The Line Settings menu displays information that relates to the configurable parameters for the lines on your
SIP Phone. The following table describes the options in this menu.
Table 16: Line Settings Menu Options
To ChangeDescriptionOption
Use Cisco Unified Communications
Manager Administration to modify.
Displays the lines and the number used to
register each line.
Name
Use Cisco Unified Communications
Manager Administration to modify.
Displays the short name configured for the line.Short Name
Use Cisco Unified Communications
Manager Administration to modify.
Displays the name used by the phone for
authentication if a registration is challenged by
the call control server during initialization.
The length of the SIP digest authentication
name is 128 characters for Cisco Unified 7900
Series SIP Phones. The authentication name is
used to verify that the phone is allowed to send
SIP messages (REGISTER, INVITE, and
SUBSCRIBE) to the Cisco Unified CM.
Longer
Authentication Name
Use Cisco Unified Communications
Manager Administration to modify.
Displays the identification the phone; used for
display for caller identification purposes.
Display Name
Display only—cannot configure.
Displays the IP address of the proxy server used
by the phone. The value is left blank because
it is not applicable to SIP Phones that are using
Cisco Unified Communications Manager.
Proxy Address
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
87
Cisco Unified IP Phone Settings
SIP Configuration Menu for SIP Phones

Cisco 7941G Specifications

General

Keypad number of keys	12
Touchscreen	-
Display resolution	320 x 222 pixels
Speakerphone	Yes
Voice codecs	G.729a
Bluetooth	No
Supported network protocols	DHCP, TFTP, SCCP, DSCP
Ethernet LAN (RJ-45) ports	2
Input voltage	48 V
Dimensions (WxDxH)	266.7 x 152.4 x 203.2 mm
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Safety	(UL) 60950, (CSA) C22.2 No. 60950, IEC 60950, EN 60950, AS/NZS 60950
Certification	CE (FCC) 15 (CFR 47) B ICES-003 B EN55022 B CISPR22 B AS/NZ 3548 B VCCI B EN55024 EN 50082-1 EN 61000-3-2 EN 61000-3-3
Compliance industry standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3af
Lines quantity	- lines
Phonebook capacity	- entries
Number of handles included	1 pc(s)

Weight and Dimensions

Weight	1600 g