Cisco 7941G

Set Admin VLAN ID Field
Procedure
Step 1
Unlock network configuration options.
Step 2
Scroll to the Admin. VLAN ID option.
Step 3
Press Edit.
Step 4
Enter a new Admin VLAN setting.
Step 5
Press Validate.
Step 6
Press Save.
Set SW Port Configuration Field
Procedure
Step 1
Unlock network configuration options.
Step 2
Scroll to the SW Port Configuration option and then press Edit.
Step 3
Scroll to the setting that you want and then press Select.
Step 4
Press Save.
Set PC Port Configuration Field
To configure the setting on multiple phones simultaneously, enable Remote Port Configuration in Enterprise
Phone Configuration (System > Enterprise Phone Configuration).
If the ports are configured for Remote Port Configuration in Cisco Unified Communications Manager,
the data cannot be changed on the phone.
Note
Procedure
Step 1
Unlock network configuration options.
Step 2
Scroll to the PC Port Configuration option and then press Edit.
Step 3
Scroll to the setting that you want and then press Select.
Step 4
Press Save.
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco
Unified Communications Manager 9.0 (SCCP and SIP)
76
Cisco Unified IP Phone Settings
Set Admin VLAN ID Field