Table 19: Locale Configuration Menu Options
To ChangeDescriptionOption
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
User locale associated with the
phone user. The user locale
identifies a set of detailed
information to support users,
including language, font, date and
time formatting, and alphanumeric
keyboard text information.
For more information on installing
user locale, see Cisco Unified
Communications Operating System
Administration Guide.
User Locale
Display only—cannot configure.
Version of the user locale loaded
on the phone.
User Locale Version
Display only—cannot configure.
Character set that the phone uses
for the user locale.
User Locale Char Set
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
Network locale associated with the
phone user. The network locale
identifies a set of detailed
information that supports the phone
in a specific location, including
definitions of the tones and
cadences used by the phone.
Network Locale
Display only—cannot configure.
Version of the network locale
loaded on the phone.
Network Locale
Version
From Cisco Unified Communications Manager
Administration, choose System > Phone NTP
Reference.
Menu to view information on NTP
server and mode configuration. For
more information, see NTP
Configuration Menu for SIP
Phones, on page 91.
NTP Configuration
(SIP Phones only)
NTP Configuration Menu for SIP Phones
The NTP Configuration menu displays information about the NTP server and mode configuration used by
SIP Phones. The following table describes the options on this menu.
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
91
Cisco Unified IP Phone Settings
Locale Configuration Menu