Cisco 7941G Administration Guide

DescriptionItem
Advertises the phone’s power priority to the switch, enabling the switch
to appropriately provide power to the phones. Settings include:
•
Unknown: default
•
Low
•
High
•
Critical
LLDP Power Priority
Indicates if CDP is supported on the PC port (default is enabled).
Enable CDP on the PC port when Cisco VT Advantage/Unified Video
Advantage (CVTA) is connected to the PC port. CVTA does not work
without CDP interaction with the phone.
When CDP is disabled in Cisco Unified Communications
Manager, a warning is displayed, indicating that disabling CDP
on the PC port prevents CVTA from working.
Note
The current PC and switch port CDP values display on the
Settings menu.
Note
CDP: PC Port
Indicates if CDP is supported on the switch port (default is enabled).
•
Enable CDP on the switch port for VLAN assignment for the phone,
power negotiation, QoS management, and 802.1x security.
•
Enable CDP on the switch port when the phone is connected to a
Cisco switch.
When CDP is disabled in Cisco Unified Communications
Manager, a warning is presented, indicating that CDP should be
disabled on the switch port only if the phone is connected to a
non-Cisco switch.
Note
The current PC and switch port CDP values display on the
Settings menu.
Note
CDP: SW Port
Indicates if the phone accepts or blocks the SSH connections.SSH Access Enabled
Network Statistics Area
The following network statistics hyperlinks on a phone’s web page provide information about network traffic
on the phone. To display a network statistics area, access the web page for the phone as described in the
following sections.
•
Ethernet Information: Displays information about Ethernet traffic.
•
Access: Displays information about network traffic to and from the PC port on the phone.
•
Network: Displays information about network traffic to and from the network (SW) port on the phone.
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco
Unified Communications Manager 9.0 (SCCP and SIP)
200
Remote Monitoring
Network Statistics Area

Cisco 7941G Specifications

General

Keypad number of keys	12
Touchscreen	-
Display resolution	320 x 222 pixels
Speakerphone	Yes
Voice codecs	G.729a
Bluetooth	No
Supported network protocols	DHCP, TFTP, SCCP, DSCP
Ethernet LAN (RJ-45) ports	2
Input voltage	48 V
Dimensions (WxDxH)	266.7 x 152.4 x 203.2 mm
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Safety	(UL) 60950, (CSA) C22.2 No. 60950, IEC 60950, EN 60950, AS/NZS 60950
Certification	CE (FCC) 15 (CFR 47) B ICES-003 B EN55022 B CISPR22 B AS/NZ 3548 B VCCI B EN55024 EN 50082-1 EN 61000-3-2 EN 61000-3-3
Compliance industry standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3af
Lines quantity	- lines
Phonebook capacity	- entries
Number of handles included	1 pc(s)

Weight and Dimensions

Weight	1600 g