Cisco 7941G Administration Guide

User Voice Messaging System Access
Cisco Unified Communications Manager lets you integrate with different voice messaging systems, including
the Cisco Unity voice messaging system. Because you can integrate with a variety of systems, you must
provide users with information about how to use your specific system.
You should provide this information to each user:
•
How to access the voice messaging system account.
Make sure that you have used Cisco Unified Communications Manager to configure the Messages button
on the Cisco Unified IP Phone.
•
Initial password for accessing the voice messaging system.
Make sure that you have configured a default voice messaging system password for all users.
•
How the phone indicates that voice messages are waiting.
Make sure that you have used Cisco Unified Communications Manager to set up a message waiting
indicator (MWI) method.
User Personal Directory Entries Setup
Users can configure personal directory entries on the Cisco Unified IP Phone. To configure a personal directory,
users must have access to the following:
•
User Options web pages: Make sure that users know how to access their User Options web pages. See
Phone Features User Subscription and Setup, on page 237 for details.
•
Cisco Unified IP Phone Address Book Synchronizer: Make sure to provide users with the installer for
this application:
Obtain Cisco Unified IP Phone Address Book Synchronizer
To download a copy of the synchronizer to send to your users, follow these steps:
Procedure
Step 1
To obtain the installer, choose Application > Plugins from Cisco Unified Communications Manager
Administration.
Step 2
Select Download, which is located next to the Cisco Unified IP Phone Address Book Synchronizer plugin
name.
Step 3
When the file download dialog box displays, select Save.
Step 4
Send the TabSyncInstall.exe file and the instructions in Cisco Unified IP Phone Address Book Synchronizer
Deployment, on page 239 to all users who require this application.
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco
Unified Communications Manager 9.0 (SCCP and SIP)
238
Internal Support Web Site
User Voice Messaging System Access

Cisco 7941G Specifications

General

Keypad number of keys	12
Touchscreen	-
Display resolution	320 x 222 pixels
Speakerphone	Yes
Voice codecs	G.729a
Bluetooth	No
Supported network protocols	DHCP, TFTP, SCCP, DSCP
Ethernet LAN (RJ-45) ports	2
Input voltage	48 V
Dimensions (WxDxH)	266.7 x 152.4 x 203.2 mm
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Safety	(UL) 60950, (CSA) C22.2 No. 60950, IEC 60950, EN 60950, AS/NZS 60950
Certification	CE (FCC) 15 (CFR 47) B ICES-003 B EN55022 B CISPR22 B AS/NZ 3548 B VCCI B EN55024 EN 50082-1 EN 61000-3-2 EN 61000-3-3
Compliance industry standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3af
Lines quantity	- lines
Phonebook capacity	- entries
Number of handles included	1 pc(s)

Weight and Dimensions

Weight	1600 g