To ChangeDescriptionOption
From Cisco Unified
Communications Manager
Administration, choose System >
Device Pool.
Indicates whether the phone shifts the call
focus on the phone screen to an incoming
call or a reverting hold call. Settings
include:
Lower—Focus priority given to incoming
calls.
Higher—Focus priority given to reverting
calls.
Even—Focus priority given to the first call.
Reverting Focus Priority
From Cisco Unified
Communications Manager
Administration, choose Device >
Phone > Phone Configuration.
Indicates whether the phone automatically
shifts the call focus to an incoming call on
the same line when the user is already on a
call.
When this option is enabled, the phone
shifts the call focus to the most recent
incoming call.
When this option is disabled, all automatic
focus changes, including Auto Line Select,
are disabled regardless of the setting.
Default: Enabled
Auto Call Select
From Cisco Unified
Communications Manager
Administration, choose Device >
Phone > Phone Configuration.
Indicates the number of seconds that
additional softkeys are displayed after the
user presses more. If this timer expires
before the user presses another softkey, the
display reverts to the initial softkeys.
Range: 5 to 30; 0 represents an infinite
timer.
Default: 5
“more” Softkey Timer
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
93
Cisco Unified IP Phone Settings
UI Configuration Menu
To Next Page
Loading...
Need help?
General
Weight and Dimensions
