Cisco 7941G Administration Guide

To ChangeDescriptionOption
Use
Cisco Unified Communications
Manager Administration to modify.
Used to optimize installation time for
phone firmware upgrades and off load the
WAN by storing images locally, negating
the need to traverse the WAN link for each
phone's upgrade.
You can set the Load Server to another
TFTP server IP address or name other than
the IPv6 TFTP Server 1 or IPv6 TFTP
Server 2 from which the phone firmware
can be retrieved for phone upgrades. When
the Load Server option is set, the phone
contacts the designated server for the
firmware upgrade.
The Load Server option allows
you to specify an alternate TFTP
server for phone upgrades only.
The phone continues to use IPv6
TFTP Server 1 or IPv6 TFTP
Server 2 to obtain configuration
files. The Load Server option does
not provide management of the
process and of the files, such as
file transfer, compression, or
deletion.
Note
When you configure both an IPv6
Load Server and a Load Server
(for IPv4), the IPv6 Load server
takes precedence.
Note
IPv6 Load Server
Use
Cisco Unified Communications
Manager Administration to modify.
Indicates the IP address and port of the
remote logging machine to which the
phone sends log messages. These log
messages help in debugging the peer to
peer image distribution feature.
The remote logging setting does
not affect the sharing log
messages sent to the phone log.
Note
IPv6 Log Server
Related Topics
Display Settings Menu, on page 60
Network Configuration Menu, on page 64
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
107
Cisco Unified IP Phone Settings
Network Configuration Menu

Cisco 7941G Specifications

General

Keypad number of keys	12
Touchscreen	-
Display resolution	320 x 222 pixels
Speakerphone	Yes
Voice codecs	G.729a
Bluetooth	No
Supported network protocols	DHCP, TFTP, SCCP, DSCP
Ethernet LAN (RJ-45) ports	2
Input voltage	48 V
Dimensions (WxDxH)	266.7 x 152.4 x 203.2 mm
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Safety	(UL) 60950, (CSA) C22.2 No. 60950, IEC 60950, EN 60950, AS/NZS 60950
Certification	CE (FCC) 15 (CFR 47) B ICES-003 B EN55022 B CISPR22 B AS/NZ 3548 B VCCI B EN55024 EN 50082-1 EN 61000-3-2 EN 61000-3-3
Compliance industry standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3af
Lines quantity	- lines
Phonebook capacity	- entries
Number of handles included	1 pc(s)

Weight and Dimensions

Weight	1600 g