Configuration referenceDescriptionFeature
For more information, see Cisco Unified
Communications Manager Features and
Services Guide, “Monitoring and
Recording” chapter.
Allows a supervisor to silently monitor an active call. The
supervisor cannot be heard by either party on the call. The
user might hear a monitoring audible alert tone during a
call when it is being monitored.
When a call is secured, the security status of the call is
displayed as a lock icon on Cisco Unified IP Phones. The
connected parties might also hear an audible alert tone that
indicates the call is secured and is being monitored.
When an active call is being monitored or
recorded, you can receive or place intercom calls;
however, if you place an intercom call, the active
call will be put on hold, which causes the
recording session to terminate and the monitoring
session to suspend. To resume the monitoring
session, the party whose call is being monitored
must resume the call.
Note
Silent Monitoring
For more information, see:
•
Cisco Unified Communications
Manager Administration Guide,
“Device Pool Configuration” chapter.
•
Cisco Unified Communications
Manager System Guide, “Cisco
Unified IP Phones” chapter.
•
Cisco Unified Communications
Manager Features and Services
Guide, “Barge and Privacy” chapter.
Allows users to press a line key to Barge or cBarge into a
remote-in-use call on a shared line.
Single Button Barge
For more information, see:
•
Cisco Unified Communications
Manager Administration Guide,
“Cisco Unified IP Phone
Configuration” chapter.
•
Cisco Unified Communications
Manager System Guide, “Cisco
Unified IP Phones” chapter
Dials a specified number that has been previously stored.Speed-Dialing
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
141
Features, Templates, Services, and Users
Telephony Features Available for Cisco Unified IP Phone
To Next Page
Loading...
