Cisco 7941G

Table 37: UCR 2008 Parameter Location
ProcedureAdministration PathParameter
Set Up UCR 2008 in Common Phone
Profile Configuration Window, on page
158
Device > Device Settings > Common
Phone Profile
FIPS Mode
Set Up UCR 2008 in Enterprise Phone
Configuration Window, on page 158
System > Enterprise Phone
Configuration
Set Up UCR 2008 in Phone
Configuration Window, on page 158
Device > PhoneSSH Access
Set Up UCR 2008 in Common Phone
Profile Configuration Window, on page
158
Device > Device Settings > Common
Phone Profile
Set Up UCR 2008 in Phone
Configuration Window, on page 158
Control Web Page Access, on page 193
Device > PhoneWeb Access
Set Up UCR 2008 in Phone
Configuration Window, on page 158
Device > PhoneHTTPS Server
Set Up UCR 2008 in Enterprise Phone
Configuration Window, on page 158
System > Enterprise Phone
Configuration
Set Up UCR 2008 in Common Phone
Profile Configuration Window, on page
158
Device > Device Settings > Common
Phone Profile
80-bit SRTCP
Set Up UCR 2008 in Enterprise Phone
Configuration Window, on page 158
System > Enterprise Phone
Configuration
Set Up UCR 2008 in Enterprise Phone
Configuration Window, on page 158
Network Configuration Menu, on page
101
Device > Device Settings > Common
Device Configuration
IP Addressing Mode
Set Up UCR 2008 in Common Phone
Profile Configuration Window, on page
158
Network Configuration Menu, on page
101
Device > Device Settings > Common
Device Configuration
IP Addressing Mode
Preference for
Signaling
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
157
Features, Templates, Services, and Users
UCR 2008 Setup