Cisco 7941G

•
HTTPS Server
•
80-bit SRTCP
Procedure
Step 1
Choose System > Enterprise Phone Configuration.
Step 2
Set the FIPS Mode parameter to Enabled.
Step 3
Set the HTTPS Server parameters to HTTPS only.
Step 4
Set the 80-bit SRTCP parameter to Enabled.
Step 5
Click Save.
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
159
Features, Templates, Services, and Users
Set Up UCR 2008 in Enterprise Phone Configuration Window