DescriptionItem
Cause of the last reset of the phoneOne of the following values:
•
Initialized
•
TCP-timeout
•
CM-closed-TCP
•
TCP-Bad-ACK
•
CM-reset-TCP
•
CM-aborted-TCP
•
CM-NAKed
•
KeepaliveTO
•
Failback
•
Phone-Keypad
•
Phone-Re-IP
•
Reset-Reset
•
Reset-Restart
•
Phone-Reg-Rej
•
Load Rejected HC
•
CM-ICMP-Unreach
•
Phone-Abort
Amount of time that has elapsed since the phone last rebootedElapsed Time
Link state and connection of the PC port (for example, Auto
100 Mb Full-Duplex means that the PC port is in a link-up
state and has auto-negotiated a full-duplex, 100-Mbps
connection)
Port 1
Link state and connection of the Network portPort 2
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco
Unified Communications Manager 9.0 (SCCP and SIP)
180
Model Information, Status, and Statistics
Network Statistics Screen