Cisco 7941G Administration Guide

DescriptionItem
Identifier of the factory-installed load running on the phoneBoot Load ID
Version of the firmware running on the phoneVersion
Phone load ID for the first Cisco Unified IP Phone Expansion Module, if
connected to the phone
Expansion Module 1
Phone load ID for the second Cisco Unified IP Phone Expansion Module, if
connected to the phone
Expansion Module 2
Revision value of the phone hardwareHardware Revision
Serial number of the phoneSerial Number
Model number of the phoneModel Number
Indicates if there is a voice message waiting on any line for this phoneMessage Waiting
Displays the following Cisco Unique Device Identifier (UDI) information about
the phone:
•
Device Type: Indicates hardware type. For example, phone displays for
all phone models
•
Device Description: Displays the name of the phone associated with the
indicated model type
•
Product Identifier: Specifies the phone model
•
Version Identifier: Represents the hardware version of the phone
The Version Identifier field might display a blank screen if the user is
using an older model Cisco Unified IP Phone, because the hardware does
not provide this information.
•
Serial Number: Displays the unique serial number of the phone
UDI
Time obtained from the Date/Time Group in Cisco Unified Communications
Manager to which the phone belongs
Time
Time zone obtained from the Date/Time Group in Cisco Unified Communications
Manager to which the phone belongs
Time Zone
Date obtained from the Date/Time Group in Cisco Unified Communications
Manager to which the phone belongs
Date
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
195
Remote Monitoring
Device Information Area

Cisco 7941G Specifications

General

Keypad number of keys	12
Touchscreen	-
Display resolution	320 x 222 pixels
Speakerphone	Yes
Voice codecs	G.729a
Bluetooth	No
Supported network protocols	DHCP, TFTP, SCCP, DSCP
Ethernet LAN (RJ-45) ports	2
Input voltage	48 V
Dimensions (WxDxH)	266.7 x 152.4 x 203.2 mm
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Safety	(UL) 60950, (CSA) C22.2 No. 60950, IEC 60950, EN 60950, AS/NZS 60950
Certification	CE (FCC) 15 (CFR 47) B ICES-003 B EN55022 B CISPR22 B AS/NZ 3548 B VCCI B EN55024 EN 50082-1 EN 61000-3-2 EN 61000-3-3
Compliance industry standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3af
Lines quantity	- lines
Phonebook capacity	- entries
Number of handles included	1 pc(s)

Weight and Dimensions

Weight	1600 g