Cisco 7941G

Procedure
Step 1
In the Directory Number Associations pane of the screen, set the primary extension from the drop-down list.
Step 2
In the Mobility Information pane, check Enable Mobility.
Step 3
In the Permissions Information pane, use the User Group buttons to add this user to any user groups. For
example, you may want to add the user to a group that has been defined as a “Standard CCM End User Group.”
To view all configured user groups, choose User Management > User Group.
Step 4
Click Save.
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
261
Basic Phone Administration Steps
Perform Final End User Setup