About This Guide
Objectives
x
Cisco SIP IP Phone 7960 Administrator Guide
78-10497-02
Objectives
The Cisco SIP IP Phone 7960 Administrator Guide provides necessary
information to get the Cisco SIP IP phone operational in a Voice-over-IP (VoIP)
network.
It is not the intent of this administrator guide to provide information on how to
implement a SIP VoIP network. For information on implementing a SIP VoIP
network, refer to the documents listed in the “Related Documentation” section on
page xi.
Organization
This administrator guide is divided into the following chapters and appendixes:
•
Chapter 1, “Product Overview” describes SIP and the Cisco SIP IP phone.
•
Chapter 2, “Getting Started with Your Cisco SIP IP Phone” describes how to
install, connect, and configure the Cisco SIP IP phone.
•
Chapter 3, “Managing Cisco SIP IP Phones” describes how to modify the
Cisco SIP IP phone’s network and SIP settings, how to access network and
call status information, and how to upgrade the firmware.
•
Appendix A, “SIP Compliance with RFC-2543 Information” provides
reference information about the SIP IP phone compliance to RFC 2543.
•
Appendix B, “SIP Call Flows” provides reference information about the
SIP IP phone call flows.
•
Appendix C, “Technical Specifications” lists the physical and operating
environment specifications, cable specifications, and connection
specifications.
•
Appendix D, “Translated Safety Warnings” lists translated safety warnings
that should be followed when installing an electrical device such as the
SIP IP phone.
To Next Page
Loading...
Need help?
General
