Chapter 3 Managing Cisco SIP IP Phones
Accessing Status Information
3-30
Cisco SIP IP Phone 7960 Administrator Guide
78-10497-02
Step 4
Highlight the parameter for which you wish to erase the setting.
Step 5
Press the Edit soft key.
Step 6
Press the << soft key to delete the current value.
Step 7
Press the Validate soft key to save your change and exit the Edit panel.
Step 8
If modifying a line parameter, press the Back soft key to exit the Line
Configuration panel.
Step 9
Press the Save soft key. The phone programs the new information into Flash
memory and resets.
Accessing Status Information
There are several types of status information that you can access via the settings
key. The information that you can obtain via the settings key can aid in system
management.
To access status information, select settings and then select Status from the
Settings menu. From the Status which the following three options are available:
•
Status Messages—Displays diagnostic messages.
•
Network Status—Displays performance messages.
•
Firmware Version—Displays information about the current firmware version
on the phone.
In addition to the status messages available via the Setting Status menu, you can
also obtain status messages for a current call.
To Next Page
Loading...
Need help?
General
