Chapter 2 Getting Started with Your Cisco SIP IP Phone
Installing the Cisco SIP IP Phone
2-16
Cisco SIP IP Phone 7960 Administrator Guide
78-10497-02
•
Domain Name—Name of the DNS domain in which the phone resides.
•
DNS Servers 1 through 5—IP address of the DNS server used by the phone
to result names to IP addresses. The phone will attempt to use DNS Servers
2 through 5 if DNS Server 1 is unavailable.
Step 7
When done, press the Save soft key. The phone programs the new information into
Flash memory and resets.
Caution
When you have completed your changes, ensure that you lock the
phone as described in the “Locking Configuration Mode” section on
page 3-2.
Connecting the Phone
You must connect the phone to the network and to a power source before using it.
Before You Begin
•
Refer to Figure 2-1 for a graphical overview of the procedures in this section.
To Next Page
Loading...
Need help?
General
