Cisco 7960 - Managing Cisco SIP IP Phones; Entering Configuration Mode

CHAPTER
3-1
Cisco SIP IP Phone 7960 Administrator Guide
78-10497-02
3
Managing Cisco SIP IP Phones
This chapter provides information on the following:
•
Entering Configuration Mode, page 3-1
•
Modifying the Phone’s Network Settings, page 3-2
•
Modifying the Phone’s SIP Settings, page 3-5
•
Setting the Date, Time, and Daylight Savings Time, page 3-22
•
Erasing the Locally-Defined Settings, page 3-28
•
Accessing Status Information, page 3-30
•
Upgrading the Cisco SIP IP Phone Firmware, page 3-33
Entering Configuration Mode
When you access the network configuration information on your Cisco SIP IP
phone, you will notice that there is a padlock symbol located in the upper right
corner of your LCD. By default, the network configuration information is locked.
Before you can modify any of the network configuration parameters, you must
unlock the phone.