Cisco 7960 Administrator's Guide

2-17
Cisco SIP IP Phone 7960 Administrator Guide
78-10497-02
Chapter 2 Getting Started with Your Cisco SIP IP Phone
Installing the Cisco SIP IP Phone
Figure 2-1 Cisco SIP IP Phone Cable Connections
Procedure
Step 1
Connect a Category 3 or 5 straight-through Ethernet cable from the switch or hub
to the network port on the phone.
See “Connecting to the Network” section on page 1-13 for more information on
the network port.
Step 2
Connect the handset and headset to their respective ports.
See “Using a Headset” section on page 1-15 for more information on the headset
port.
Handset
port
Headset
port
Cisco IP Phone 7960 (rear view)
38006
Power
outlet
RJ-11 port
(optional power
cable)
AC adapter
port
(DC48V)
Access port
(10/100 PC)
Network port
(10/100 SW)

Cisco 7960 Specifications

General

Codecs	G.711, G.729a
Protocol Support	SCCP, SIP
Ethernet Ports	2 x 10/100 Ethernet ports
Power Options	Power over Ethernet (PoE), AC adapter
Audio	Full-duplex speakerphone
Buttons	6 line buttons
Weight	3.5 pounds