2-9
Cisco SIP IP Phone 7960 Administrator Guide
78-10497-02
Chapter 2 Getting Started with Your Cisco SIP IP Phone
Installing the Cisco SIP IP Phone
The following is an example of a SIP default configuration file:
; sip default configuration file
#Image Version
image_version:P0S3
xxyy
;
#Proxy server address
proxy1_address: 192.168.1.1 ;
#Subdirectory config file location
tftp_cfg_dir: /tftpboot/configs/sipphone
Creating the Phone-Specific SIP Configuration File
In the phone-specific SIP configuration file, define the parameters that are
specific to a phone such as the lines configured on a phone and the users defined
for those lines.
Before You Begin
•
Review the guidelines and restrictions documented in the “Configuration File
Guidelines” section on page 2-6.
•
Line parameters (those identified as linex) define a line on the phone. If you
configure a line to use an e-mail address, that line can be called only using an
e-mail address. Similarly, if you configure a line to use a number, that line can
only be called using the number. Each line can have a different proxy
configured.
•
For a complete list of the SIP parameters that you can configure, see the
“Modifying the Phone’s SIP Settings” section on page 3-5.
To Next Page
Loading...
Need help?
General
