Cisco 7960 Administrator's Guide

Chapter 3 Managing Cisco SIP IP Phones
Modifying the Phone’s SIP Settings
3-6
Cisco SIP IP Phone 7960 Administrator Guide
78-10497-02
Table 3-1 lists each of the SIP parameters that you can configure. In the
Configuration column, the name of a parameter as you would specify it in a
configuration file is listed. In the menu column (SIP Configuration, Network
Configuration, and Services), the name of the same parameter as it would appear
on the user interface is listed. If NA appears for a parameter name in a menu
column, it can cannot be defined via that menu.
Table 3-1 SIP Parameters Summary
Configuration File SIP Configuration Menu Network Configuration
Menu
Services Menu
anonymous_call_block NA NA Anonymous Call Block
autocomplete NA NA Auto-Complete
Numbers
callerid_blocking NA NA Caller ID Block
dial_template NA NA NA
dnd_control NA NA NA
dst_auto_adjust NA NA NA
dst_offset NA NA NA
dst_start_day NA NA NA
dst_start_day_of_week NA NA NA
dst_start_month NA NA NA
dst_start_time NA NA NA
dst_start_week_of_mon
th
NA NA NA
dst_stop_day NA NA NA
dst_stop_day_of_week NA NA NA
dst_stop_month NA NA NA
dst_stop_time NA NA NA
dst_stop_week_of_mon
th
NA NA NA
dtmf_avt_payload NA NA NA
dtmf_db_level NA NA NA
dtmf_inband NA NA Do Not Disturb

Cisco 7960 Specifications

General

Codecs	G.711, G.729a
Protocol Support	SCCP, SIP
Ethernet Ports	2 x 10/100 Ethernet ports
Power Options	Power over Ethernet (PoE), AC adapter
Audio	Full-duplex speakerphone
Buttons	6 line buttons
Weight	3.5 pounds